Decimalisation

This section contains archival material from former Forum users.
Membership forms: http://www.abpa.org.au/membership.html
Post Reply
ALANM
Posts: 96
Joined: Sat Oct 12, 2019 2:57 pm
Location: North Queensland

Decimalisation

Post by ALANM » Sun Dec 13, 2020 8:22 pm

Decimalisation
(By Alan McCosker December 2020)

“ In come the dollars, in come the cents
out go the pounds, the shillings and the pence “.
So the the jingle went, when Dollar Bill was singing
back in sixty six, a big change was in the making.

One cent replaced a penny and ten cents replaced a shilling
but did not a shilling have twelve pence, how about explaining.
A dollar is one hundred cents and replaced the ten bob note
I reckon that’s twenty pennies short, I’m sure that’s a rort.

Early in the seventies, more changes were to come
out went feet and inches, miles per hour were also gone.
Acres, pounds and ounces and gallons got the dump
and along came kilometres and litres at the pump.

All of these are multiples of, or divisible by tens
compared to old Imperial, it made a lot more sense.
As the number twelve progressed, in Imperial calculations
it oft would leave me non-plussed, in con-fused agitation.

But I’ve longtime come to terms, with decimalisation of the currency
I rarely have enough to spend anyhow, it never is a worry.
But I’ve not quite come to terms, with metric weights and measure
too many years of feet and inches, centimetres make me shiver.

I can envision how far an inch is and a foot is somewhat easier
but I oft can’t make distinction, ‘tween millimetre and centimetre.
I thank the stars for rulers, that have both systems on their markings
’specially made for dummies like me, to save embarrassment for asking.

In short I’m more than happy, with the decimalisation of our country
having grown up with Imperial, I now reckon we’re really lucky
I only have a problem now, when they start talking bytes and nanos
I can’t keep up with the pace of change, so reckon I’ll go retro.

User avatar
Shelley Hansen
Posts: 2224
Joined: Sun May 04, 2014 5:39 pm
Location: Maryborough, Queensland
Contact:

Re: Decimalisation

Post by Shelley Hansen » Sat Dec 26, 2020 9:12 pm

Ah! Progress, Alan! Gotta keep up ;) :lol:
Shelley Hansen
Lady of Lines
http://www.shelleyhansen.com

"Look fer yer profits in the 'earts o' friends,
fer 'atin' never paid no dividends."
(CJ Dennis "The Mooch o' Life")

r.magnay
Posts: 1402
Joined: Sun Oct 31, 2010 1:41 pm
Location: Port Lincoln SA

Re: Decimalisation

Post by r.magnay » Thu Feb 04, 2021 4:37 pm

..Yeah Alan, when metric measurements came in I used to get into all sorts of strife, measuring with a tape that had both metric and imperial marked on it wasn't a good thing, when I chucked that away and just got a metric tape, it all came together.
I was working with an old bloke who reckoned they should have left it all alone, he wasn't too keen on converting to metric in anything. we were working out bush somewhere, I think Oodnadatta, we had to measure something up and he was measuring and calling out the measurements to me..."one metre and two and a half inches" was the first measurement he called out.... I told him it might be better if I did the measurements and he wrote them down...
Ross

ALANM
Posts: 96
Joined: Sat Oct 12, 2019 2:57 pm
Location: North Queensland

Re: Decimalisation

Post by ALANM » Tue Feb 09, 2021 7:44 pm

G'day Ross,
Never had any trouble with the money change-over, never had enough to worry about back then.
Struggled for a long time with the measurements until, as you did, I stopped trying to convert and just went metric.
Still_ bytes, nanos and hectares have me wondering.
Cheers
Alanm

Post Reply